Grid casting machine
This Grid Casting machine can be used for many different lead alloy, it is with high production capacity and good production quality. It adopts advanced technology and with continuous promotion, which can save energy and be easy for control and maintenance.
1. The main motor speed adopts imported frequency converter as stepless speed regulation, continuously variable frequency. The mold open and close, lead liquid supply adopt good quality pneumatic parts.
2. Lead supplying system takes quantitative lead control. Structure is simple. The lead valve spool can stand high temperature and suitable for long using life, which is easy for replacing.
3. The horizontal pull rod structure can ensure the machine move smoothly and reduce blur, so that reduce manual mold spraying to increase the production capacity.
4. Lead scrap recycling device can be optional, which can lower the labor strength.
Specification:
Lead Furnace/Pot | 3KW*6=18kw |
Mould Heater | 1.6KW*2sets=3.2kw |
Power for Lead Scrap Motor | 0.4kw |
Total Power | 26.7KW |
Grid Range | W*L*T=(100~180)*(250~385)*(1~5)mm |
Power Supply | 380V±10% |
Cooling Water | Pipe Diameter:2/5inch and outlet pipe:7/8 inch |
Compressed Air Pressure | 0.4~0.6Mpa |
Weight | 1.85T |
Lead Ladle | 900W*4sets=3.6KW |
Main Motor | 1.5KW |
Lead Furnace Capacity | 0.9T |
Air Exhaust Amount | Not less than 0.3m³/min |
Cooling Water Volume | 5~6 m3 |
Production Capacity | 12~17 panels/min |